Miscellaneous 2017-03-10T07:59:36+00:00

Steel Products

In addition to our standard products, we also offer a wide range of semi-finished products, such as strip steel, coils and bars. Furthermore, we also deliver flat products in a number of different grades, including roof strapping.

Strip steel

  • For sophisticated machine processing to deliver a high level of quality
  • Hot-dip galvanised strip steel with fully galvanised edges, in coils and bars
  • Hot-rolled strip steel in coils and bars
  • Rounded edges in both warm-rolled and fully galvanised design are available

Slit strip: hot-rolled strips of various qualities are split to fit the desired width.
Rounded edges: after the splitting process, the edges are rounded using a machine.

WidthThickness
18 – 100 mm1,5 – 5,0 mm

Grades:

S185S235JRS275JRS355JRS355MC
DD11DD12DD13

Zinc coating: (ertified by German Zinc Coating Society: DVV.)
The processability, particularly in the molding process, is determined primarily by the thickness of the zinc coating and the quality of the steel.

Z 150: (20my)
used if high levels of moldability are required and for manual and machine-based manufacturing of profiles, construction elements, cable reinforcements and gutter brackets.

Z 225: (30my)
For standard anti-corrosion properties and simple molding, as well as for the manufacturing of fittings, wide angled and U-shaped profiles, clamps and suspensions, cable trays and cable ladders, packaging straps, cask hoops etc.

Z 300 and Z500: (40my and 70my)
For elevated and sophisticated anti-corrosion properties but with limited moldability. For lightning protection and earthing systems.

 

Tolerances:

Thickness:  The nominal thickness is classed as the thickness of the final hot-dip galvanised strip steel product, i.e. the combination of the base material and the zinc coating.
Width:  
The nominal width is classed as the thickness of the final hot-dip galvanised strip steel product, i.e. the combination of the base material and the zinc coating along the sides.

Additional dimensions, grades and designs available on request
Products may differ from the images

Coils

Inner Diameter:Outer Diameter:
ca. 508 mm (Standard)Customised dimensions (max. 1500 mm)
please specify when placing order

Without welding seam:
Coil weight can’t be customised (shorter coils available)

With welding seam:
Only limited suitability for machine processing. Coil weights can be customised but must weigh a minimum of 20 kg and
have a maximum outer diameter of 1500 mm.

Strapping:
For weights above 50 kg – 3 x Signode strapping ½“
For weights below 50 kg – 2 x Signode strapping ½“

Bundling:
packed into crane bundles usually weighingat least 500 kg/bundle.

Shipment:

  • standard – horizontal axis
  • stacked flat on wooden beam structure
  • on disposable pallets, stacked flat
  • on EURO pallets in exchange for used EURO pallets
  • with timber beams separating the individual coils (surcharge payable)

*Ring length in metres: Please contact us for more information
Additional dimensions, grades and designs available on request
Products may differ from the images

 

Bars

  • available for delivery in lengths of between 1000 to 7000 mm (standard)
  • Length tolerance -0/+50 mm
  • other lengths and tolerances available upon agreement
  • permissible deviations in line with DVV standards
Nominal thickness
mm
Nominal width
tolerance mm
Nominal thickness
tolerance mm
1,2 -<2,0+0,8+/-0,15+0,21-0,15
2,0 -<4,0+0,8+/-0,17+0,23-0,17
4,0 – 5,0+0,8+/-0,19+0,25-0,19
Zinc coating on
each side
150 g/m²
225 g/m²
Zinc coating on
each side
300 g/m²
500 g/m²

Additional dimensions, grades and designs available on request
Products may differ from the images

Flat Products

Elektrolytisch galvanised sheets DC01–DC06

  • Dimensions: 0,50 – 3,00 mm

Quarto-sheets S235JR/S275JR/S355J2/C45

  • Dimensions: 15 – 150 mm

Slit strips, cuttings and coils

  • cold-rolled, galvanised, warm-rolled, black and stained

Cold-rolled sheets DC01-DC07

  • Dimensions: 0,50 – 3,00 mm
  • Greased and non-greased
  • Stocked and customised formats

Galvanised sheets DX51-DX56D+Z150-275MAC

  • Dimensions: 0,40 – 5,00 mm
  • Aluzinc, galfan, FAL, galvanealed, plastic-layered

Hot-rolled, stained sheets DD11/S235JR/S355MC

 

  • Dimensions: 1,5 – 20 mm

Additional dimensions, grades and designs available on request
Products may differ from the images

Roof Strapping

Perforated steel strapping which provides diagonal bracing for roof structures and prevents parallel rafters from sliding past one another (shearing).

  • perforation 2-1-2
  • diameter 5 mm / ID approx. 400 mm
  • galvanised edges and fully certified

 

Article No.Dimensions mmCoil Size metres approx.
2R25202525 x 2,025
2R40152540 x 1,525
2R40154040 x 1,540
2R40155040 x 1,550
2R40201040 x 2,010
2R40202540 x 2,025
2R40205040 x 2,050
2R60152560 x 1,525
2R60154060 x 1,540
2R60155060 x 1,550
2R60202560 x 2,025
2R60205060 x 2,050

Additional coil sizes available on request
Additional dimensions, grades and designs available on request
Products may differ from the images